For Sale/ Wanted/ Trade
Page Last Updated:
August 27th, 2015
~ Instructions For Submitting Ads ~
For Instructions and to Submit an Ad
~ FOR SALE ~ WANTED ~ TRADE ~
This is an 18' Glastron fiberglass boat with a classic style that sets it apart from your standard runabout.
The Bayflite was made with larger sides to handle rough water and larger lakes, yet small enough to zip around with.
Hull in good shape, deck and sides are also nice, it needs a new sub floor and interior.
No delivery, must be picked up.
Neptunes & 4cyl Evinrudes, FS
1.7 hp Neptunes, c1947?
WC1 F2622RE complete, ran $50
WC1 H2533RE complete, run? $40
u/k ----------- complete/parts $25
11A1 42036B1 90%comp/parts $20
Evinrude 5.4hp Zephyr, complete/good $65
Evinrude 9.7hp Lightfour, complete/good $75
E-V 4cyl Irgens l/u & mid, complete/good $40
4 vintage boat motors for sale, all in running condition.
We have a 1913 Evinrude Outboard Motor with Magneto Battery Box for sale.
This piece is in very good condition and has been safely stored for many years by our Dad. The Flywheel is not seized and turns easily.
The only piece that seems to be missing is a handle for the tiller, which also moves easily.
We live in the Edmonton area and would like to find a buyer near to us as shipping is a concern.
We are asking $500 for the motor.
1963 Merc 500
50Hp, nice shape, electric or pull start, complete, no controls.
Previous owner said it ran.
I have a 1958 Eaton Viking Boat Trailer to sell. it has been refurbished. I am asking $2000. l am located in Warkworth, ON
Aro liner boat
Late 50s Aro Liner 14 ft Aluminum Boat. Rare unmolested original. Dry stored for many years
This boat was originally purchased from Bob Kerr of the MLS prior to his untimely death.
Many chapter members sought this boat so Bob had made me commit to resell it to a Chapter member once I was ready to part with it.
The boat is made of quality aluminum guage and rated for 25 hp. It will plane with a 6 hp motor. Very smooth with a fats hull. Good in rough water. Welded hull.
Purchase includes the original Tee Nee Trailer, with new bearings/wheels in addition to a number of available motors:
- Chris Craft Commander
- Mercury Mk10, 15, 20, 25,
- Mark 28,
- Merc 200 or 250
Chrysler Outboard motor
105 HP. Good spark/ good
comp./ with harness. Clean motor/ Manual shift. [ Not Seized ]
Asking $ 200.00
2 & 3 blade aluminum props, fit all OMC Big Twins,1951 >197?, 36 44
ie 22-25-28-30-33-35-40hp, aka Johnson RDs, Buccaner, E-Vs,Gale,Viking &c,&c.
8in 16 pitch, some NOS, others??, $20-$125
Many 2>3>4 blade SS & bronze race props, 30s on
16 ft. Bow Rider, 16 ft. Trailer, and 65 hp. Motor. All sold separately.
1949 QD10 Johnson
1947 Viking- 5hp
1957 Viking 5hp
1953 Viking 12 hp
1961 Merc 700 70 hp L/S
1959 Viking 5hp
1961 Merc 6 hp-no lower unit-good for parts
1965 Merc500 S/S 50hp
1947 Scott-Atwater 3.6 hp
1960 Elgin 25hp S/S
also many parts - lower units, hoods, props, etc.
also selling a collection of scott motors 5hp, 7.5hp, 10hp,16hp,22hp,25hp
1958 Johnson 5.5hp
1947 Mercury KD4S 6hp
Looking for a recoil assembly & pull cord for a 1979 evinrude 6 hp
Or a doner motor
Peterborough cedar strip boat
Includes trailer and 40 HP Viking motor
Chris Craft Commander
The cornerstone of my collection....195? Chris Craft Commander outboard.
Comes with a throttle cable/lever and steering wheel for hydroplane mounting.
Advertised as 10hp but was really closer to 18hp. Motor turns over well(not seized)
has one bad coil but I have bought a correct new one but not installed and is included.
Needs to be painted to complete restoration.Best reasonable offer
1962 Viking 15hp
have a 1962 Viking 15 HP to sell. My Mother bought if from Eatons in Belleville ON for Christmas for my Dad in 1962 an he owned it until he died in 2008.
I have it now and would like some one else to get some use out of it. Low hours, I dont think it ran other than a bi yearly test in a garbage can from 1979 on until about 2004.
It will run but roughly, I would imagine it will need a fuel system clean out and a tune up. I have the original tank and hose and a plastic tank from the 1990s goes with it.
Has the original prop still on it. I would love to keep it for its sentimental value,
my older brother and I spent some wonderful summer days and evening on the Bay of Quinte with our Dad in plywood boat he build from scratch and this great motor,
but I have to draw the line somewhere and I dont even have a boat to run it on anymore. Asking $250.
1956 Evinrude 7.5hp
Evinrude Fleetwin, 1956. 7.5. #7520-52529. Good shape, no dings.
Along with this motor goes about 35 Parts and Service Catalogues and Manuals with Schematics for engines
controls, fuel systems, accessories, etc. (1951 to 1959) Also Johnson Seahorse Service Manual #302231 (270 pages)
(Please read through before submitting your ad)
~ Instructions For Submitting Ads ~
'TRADING POST' section of the Maple Leaf Antique Outboard Club Forum for further instructions.
to arrange for it to be relisted. Once removed, you will need to re-submit your ad.
Please send your REMOVE AD request from
the Same Email Address as is linked to your ad.
~ Remove Ad Here ~
~ Submit Ad Here ~
If you wish to become a member of the club, you can join for only $15 Canadian per year!
to print out a membership application.
You do not need to own an outboard motor to join.
Home | About | Schedule
Membership | News | MLAOC Online Forum
For Sale/ Trade/ Wanted | Parts/ Supplies/ Services
Links | MLC Web Admin